VSI5X Series Crusher (Sand Making Series)

VSI5X Series Crusher (Sand Making Series)
Based on the European technology and years’ research ,our company has developed this kind of new high-effiency crusher .And it has integrated the three types of crushing into a single whole.VSI5X series crushers are widely used in metal and nonmetal mine, concrete, fireproof material, abrasive filler, frit, construction aggregate, sand, metallurgy and so on.

VSI5X Series Crusher (Sand Making Series)Main Structures

It consists of riveted frame base,main shaft assembly ,rotator assembly ,transmission motor assembly,frame,hydraulic jacking assembly and double sides’falsework.Auxiliary parts :electrical system ,lubrication system.

VSI5X Series Crusher (Sand Making Series) Working  Principle :

Feeding at center The material falls down into the feed hopper ,and then enter the high speed impeller through the central feeding hopper ,and at last they will be throwen out from the impeller.The materials strike with the materials that are freely falling down and then crush togetherly to the vortex liner and are rebounded to the top of vortex cavity ,and then falling down. The falling materials with the shoot materials form a continuous materials curtain .After several this kind of repeating , the final materials will be discharged from the discharging opening . Feeding both at center and sides: Raw material falls down into the feed hopper and the circle ring, and then they are divided into two divisions by the distributing plate. One enters the high speed impellor and then theywill be accelerated and thrown out from the impeller. The other falls down from the sides of distributing plate. Then this two kinds of materials will crush with each other, and then strike togetherly to the vortex liner and are rebounded to the top of vortex cavity ,and then falling down. The falling materials with the shoot materials form a continuous materials curtain .After several this kind of repeating , the final materials will be discharged from the discharging opening .

VSI5X Series Crusher (Sand Making Series) Technical advantages :

Optimized design improves crushing effiency
Convertible distributor simplifies the operation.
Optimized deep-cavity rotor improve the material throughput by a lot.
Advanced shoot opening and fluent inner curve reduce the flowing resistance which improve the throughput by large extent.
Technological precedence leads industry high-standard
Adopting international famous brand bearing from Japan, Sweden, America and so on.
The hydraulic uncap assembly adopts Japanese imported with original packaging parts which make the maintenance easier and more convenient.

Adopting high protection standard motor with high efficiency and low noise. The motor accords with IEC standard, F insulation, IP 54/55 protection standard.And the core wear resistant material adopts the American high-standard wear resistant material.

Updated quality extends service life and reduces cost
1、Part-worn around protecting plate can be reversed end for end to use again which improve the operating factor .
2、Adopting the lozenge impact plate protects the frame better.
3、Assembled hammer reduces the cost by more than 30%. In addition, adding the assistant hammer which protects the frame when the main hammer is worn.
4、Airproof structure of main axle end avoids oil leaking without felt washer.

VSI5X Series Crusher (Sand Making Series) Main specification :

Model			VSI5X7615	VSI5X8522	VSI5X9532	VSI5X1145
Throughput capacity(t/h)		Feed both at center and sides	150~280	240~380	350~540	500~640
		Feed	70~140	120~200	180~280	250~360
Max feed size (mm)		soft materials	<35	<40	<45	<50
		Hard materials	<30	<35	<40	<45
rotation speed(r/min)			1700~1900	1500~1700	1300~1510	1100~1310
Double motor power (kw)			110~150	180~220	260~320	400~440
Overall dimension L*W*H (mm)			3700×2200 ×2300	4140×2300 ×2700	4560×2500 ×2900	5000×2700 ×3400
weight(t)			8.6	11.8	17.5	27.5
Power supply			380v，50Hz
Light-oil lubrication station	Power of double lubropump motor		2X0.31kW
	safety protection		Double complementary lubropumps supply oil. Auto-stop without oil flow. Water-cool system. Motor-heating for winter.
	Oil-tank heating power		2kW
	Overall dimension L*W*H (mm)		820X520X1270

Note: This specification is just for reference, any changes are subject to the products.